fbpx

About Alberti

Alberti live tools and angle heads, made in Italy, are high quality tools with exceptional slim design.

Key Competitive Advantages:

  • Body is cast iron which improves thermal stability, rigidity and provides dampening properties
  • Monolithic hardened steel spindle input & arbor increases resistance to bending stress by upto 25%. Especially important for extra length angle heads. It also improves balance and makes it possible to reach higher RPM without vibrations.
  • Better angle head life from less vibrations and structural integrity. Monolithic construction cannot “just” fall apart.
  • Slim design increases ability to access restricted areas
  • Ability for long reach with slim body
  • Improved accuracy and concentricity

Alberti Products

Reading Part Numbers

  • “Type” “Mounting” “Size” “Extra”
  • Direction Notes

Type

  • T90 = 90° Angle Head
  • TR90 = 90° Offset Angle Head
  • TH = High Pressure Internal Coolant (100 Bar)
  • TCU = Adjustable Angle Head
  • TA = Fixed 1 angle
  • TDA = Fixed 2 angles

Mounting

  • +cn = Arbour Mounted
  • no “cn” = Manual Mounted Flange

Size

  • 0.4
  • 0.5
  • 1.5
  • 2.5
  • 3.5
  • 4.5
  • 5

Extra

  • 100 Bar = 100 Bar Internal Through Coolant
  • L = Extra Length
  • M = Aluminium
  • U = Dual Output

Direction Notes

  • Green = Same as spindle
  • Red = Opposite to spindle

Reading Part Numbers

  • “Type” “Mounting” “Size” “Extra”
  • Direction Notes

Type

  • T90 = 90° Angle Head
  • TR90 = 90° Offset Angle Head
  • TH = High Pressure Internal Coolant (100 Bar)
  • TCU = Adjustable Angle Head
  • TA = Fixed 1 angle
  • TDA = Fixed 2 angles

Mounting

  • +cn = Arbour Mounted
  • no “cn” = Manual Mounted Flange

Size

  • 0.4 = ER 8
  • 0.5 = ER 11
  • 1.5 = ER 16
  • 2.5 = ER 25
  • 3.5 = ER 32
  • 4.5 = ER 40
  • 5 = ISO 40

Extra

  • 100 Bar = 100 Bar Internal Through Coolant
  • L = Extra Length
  • M = Aluminium
  • U = Dual Output

Direction Notes

  • Green = Same as spindle
  • Red = Opposite to spindle