Wishlist
0
You have no items in your shopping cart.
MENU

HSS / Cobalt

High Performance

  • Parabolic flute
  • Universal
  • High temp alloys
  • Spot starter drill
  • Micro drills small diameter cobalt

General Purpose

  • Standard helix
  • High helix
  • Low helix
  • Taper Shank Morse taper shank

Parabolic flute

GT50

The GT50 design is best suited for aluminum and gummy materials. The wide open flute design allows the GT50 to drill faster and deeper than conventional Type N flute profiles without time consuming retracts for chip clearing. GT50 parabolic drills are used in taper length and extra length style drills for deeper hole applications.

GT80

GT80 parabolic drills have a thicker web design than a GT50 drill for steel, alloyed steel and cast iron materials. The GT80 flute form is available in stub and jobbers length tools where extra rigidity is desirable.

GT100

The GT50 design is best suited for aluminum and gummy materials. The wide open flute design allows the GT50 to drill faster and deeper than conventional Type N flute profiles without time consuming retracts for chip clearing. GT50 parabolic drills are used in taper length and extra length style drills for deeper hole applications.

GT500

The GT50 design is best suited for aluminum and gummy materials. The wide open flute design allows the GT50 to drill faster and deeper than conventional Type N flute profiles without time consuming retracts for chip clearing. GT50 parabolic drills are used in taper length and extra length style drills for deeper hole applications.

Universal

5519
5519
Cobalt, GU 500 DZ universal, jobber length, 118° 4-facet split point, standard straight shank, RH helix
Product Features• Co-alloyed high speed steel
• Low feed force required
• Low torque required
• Increased wear resistance
• Universal application		 Product Specs• Series: 5519
• Coolant: without
• Material: Cobalt
• Standard: DIN 338
• Surface: TiN
• Type: GU 500 DZ
• Point Angle: 118
• Shank: Straight
• Cut Dir.: right hand
• Tolerance: h8
• Dia. Range: 1.000 – 14.000
5520
5520
Cobalt, GU 500 DZ universal, stub length, 118° 4-facet split point, standard straight shank, RH helix
Product Features• Co-alloyed high speed steel
• Low feed force required
• Low torque required
• Universal application		 Product Specs• Series: 5520
• Coolant: without
• Material: Cobalt
• Standard: DIN 1897
• Surface: TiN
• Type: GU 500 DZ
• Point Angle: 118
• Shank: Straight
• Cut Dir.: right hand
• Tolerance: h8
• Dia. Range: 1.000 – 14.000
5523
5523
Cobalt, GU 500 DZ universal, jobber length, 118° 4-facet split point, standard straight shank, RH helix
Product Features• Co-alloyed high speed steel
• Low feed force required
• Low torque required
• Universal application		 Product Specs• Series: 5523
• Coolant: without
• Material: Cobalt
• Standard: DIN 338
• Surface: Bright
• Type: GU 500 DZ
• Point Angle: 118
• Shank: Straight
• Cut Dir.: right hand
• Tolerance: h8
• Dia. Range: 1.000 – 14.000
5524
5524
Cobalt, GU 500 DZ universal, stub length, 118° 4-facet split point, standard straight shank, RH helix
Product Features• Co-alloyed high speed steel
• Low feed force required
• Low torque required
• Universal application		 Product Specs• Series: 5524
• Coolant: without
• Material: Cobalt
• Standard: DIN 1897
• Surface: Bright
• Type: GU 500 DZ
• Point Angle: 118
• Shank: Straight
• Cut Dir.: right hand
• Tolerance: h8
• Dia. Range: 1.000 – 14.000
5536
5536
Cobalt, GU 500 DZ universal, taper length, 118° 4-facet split point, standard straight shank, RH helix
Product Features• Co-alloyed high speed steel
• Low feed force required
• Low torque required
• Increased wear resistance
• Universal application		 Product Specs• Series: 5536
• Coolant: without
• Material: Cobalt
• Standard: DIN 340
• Surface: Bright
• Type: GU 500 DZ
• Point Angle: 118
• Shank: Straight
• Cut Dir.: right hand
• Tolerance: h8
• Dia. Range: 1.000 – 14.000
5537
5537
Cobalt, GU 500 DZ universal, taper length, 118° 4-facet split point, standard straight shank, RH helix
Product Features• Co-alloyed high speed steel
• Low feed force required
• Low torque required
• Increased wear resistance
• Universal application		 Product Specs• Series: 5537
• Coolant: without
• Material: Cobalt
• Standard: DIN 340
• Surface: TiN
• Type: GU 500 DZ
• Point Angle: 118
• Shank: Straight
• Cut Dir.: right hand
• Tolerance: h8
• Dia. Range: 1.000 – 14.000

High temp alloys

2458
2458
Cobalt, Type Ti, jobber length, self-centering 130° split point, web thinned >1.0mm dia., standard straight shank, RH helix
Product Features• Co-alloyed high speed steel
• Increased wear resistance		 Product Specs• Series: 2458
• Coolant: without
• Material: Cobalt
• Standard: DIN 338
• Surface: FIREX
• Type: Ti
• Point Angle: 130
• Shank: Straight
• Cut Dir.: right hand
• Tolerance: h8
• Dia. Range: 1.000 – 14.500
605
605
Cobalt, Type Ti, jobber length, self-centering 130° split point, web thinned >1.0mm dia., standard straight shank, RH helix
Product Features• Co-alloyed high speed steel
• Increased wear resistance		 Product Specs• Series: 605
• Coolant: without
• Material: Cobalt
• Standard: DIN 338
• Surface: Bright
• Type: Ti
• Point Angle: 130
• Shank: Straight
• Cut Dir.: right hand
• Tolerance: h8
• Dia. Range: 0.200 – 19.050
610
610
Cobalt stub length, self-centering 130° split point, web thinned all dia., standard straight shank, RH helix
Product Features• No Info Available Product Specs• Series: 610
• Coolant: without
• Material: Cobalt
• Standard: DIN 1897
• Surface: Bright
• Type: GU 500 DZ
• Point Angle: 135
• Shank: Straight
• Cut Dir.: right hand
• Tolerance: h8
• Dia. Range: 1.000 – 14.290
617
617
Cobalt, Type Ti, taper length, self-centering 130° split point, web thinned all dia., standard straight shank, RH helix
Product Features• Co-alloyed high speed steel
• Increased wear resistance		 Product Specs• Series: 617
• Coolant: without
• Material: Cobalt
• Standard: DIN 340
• Surface: Bright
• Type: Ti
• Point Angle: 130
• Shank: Straight
• Cut Dir.: right hand
• Tolerance: h8
• Dia. Range: 1.000 – 15.870
657
657
Cobalt, Type Ti, jobber length, self-centering 130° split point, web thinned >1.0mm dia., standard straight shank, RH helix
Product Features• Co-alloyed high speed steel
• Increased wear resistance		 Product Specs• Series: 657
• Coolant: without
• Material: Cobalt
• Standard: DIN 338
• Surface: TiN
• Type: Ti
• Point Angle: 130
• Shank: Straight
• Cut Dir.: right hand
• Tolerance: h8
• Dia. Range: 0.500 – 14.500 FREE
669
669
Cobalt, Type Ti, taper length, self-centering 130° split point, web thinned all dia., standard straight shank, RH helix
Product Features• Co-alloyed high speed steel
• Increased wear resistance		 Product Specs• Series: 669
• Coolant: without
• Material: Cobalt
• Standard: DIN 340
• Surface: TiN
• Type: Ti
• Point Angle: 130
• Shank: Straight
• Cut Dir.: right hand
• Tolerance: h8
• Dia. Range: 1.000 – 10.200

Spot starter drill

556
556
NC Spot Drill
Product Features• Only suitable for spotting Product Specs• Series: 556
• Coolant: without
• Material: High Speed Steel
• Standard: Guhring standard
• Surface: Bright
• Type: N
• Point Angle: 120
• Shank: Straight
• Cut Dir.: right hand
• Tolerance: h6
• Dia. Range: 3.000 – 25.400
557
557
NC Spot Drill
Product Features• Only suitable for spotting Product Specs• Series: 557
• Coolant: without
• Material: High Speed Steel
• Standard: Guhring standard
• Surface: Bright
• Type: N
• Point Angle: 90
• Shank: Straight
• Cut Dir.: right hand
• Tolerance: h6
• Dia. Range: 2.950 – 25.400
559
559
NC Spot Drill
Product Features• Only suitable for spotting Product Specs• Series: 559
• Coolant: without
• Material: High Speed Steel
• Standard: Guhring standard
• Surface: Bright
• Type: N
• Point Angle: 90
• Shank: Straight
• Cut Dir.: right hand
• Tolerance: h6
• Dia. Range: 6.350 – 25.400
567
567
NC Spot Drill
Product Features• Only suitable for spotting Product Specs• Series: 567
• Coolant: without
• Material: High Speed Steel
• Standard: Guhring standard
• Surface: TiN
• Type: N
• Point Angle: 120
• Shank: Straight
• Cut Dir.: right hand
• Tolerance: h6
• Dia. Range: 3.000 – 25.000
568
568
NC Spot Drill
Product Features• Only suitable for spotting Product Specs• Series: 568
• Coolant: without
• Material: High Speed Steel
• Standard: Guhring standard
• Surface: TiN
• Type: N
• Point Angle: 90
• Shank: Straight
• Cut Dir.: right hand
• Tolerance: h6
• Dia. Range: 3.000 – 25.400
556
556
NC Spot Drill
Product Features• Only suitable for spotting Product Specs• Series: 556
• Coolant: without
• Material: High Speed Steel
• Standard: Guhring standard
• Surface: Bright
• Type: N
• Point Angle: 120
• Shank: Straight
• Cut Dir.: right hand
• Tolerance: h6
• Dia. Range: 3.000 – 25.400
557
557
NC Spot Drill
Product Features• Only suitable for spotting Product Specs• Series: 557
• Coolant: without
• Material: High Speed Steel
• Standard: Guhring standard
• Surface: Bright
• Type: N
• Point Angle: 90
• Shank: Straight
• Cut Dir.: right hand
• Tolerance: h6
• Dia. Range: 2.950 – 25.400
559
559
NC Spot Drill
Product Features• Only suitable for spotting Product Specs• Series: 559
• Coolant: without
• Material: High Speed Steel
• Standard: Guhring standard
• Surface: Bright
• Type: N
• Point Angle: 90
• Shank: Straight
• Cut Dir.: right hand
• Tolerance: h6
• Dia. Range: 6.350 – 25.400
567
567
NC Spot Drill
Product Features• Only suitable for spotting Product Specs• Series: 567
• Coolant: without
• Material: High Speed Steel
• Standard: Guhring standard
• Surface: TiN
• Type: N
• Point Angle: 120
• Shank: Straight
• Cut Dir.: right hand
• Tolerance: h6
• Dia. Range: 3.000 – 25.000
568
568
NC Spot Drill
Product Features• Only suitable for spotting Product Specs• Series: 568
• Coolant: without
• Material: High Speed Steel
• Standard: Guhring standard
• Surface: TiN
• Type: N
• Point Angle: 90
• Shank: Straight
• Cut Dir.: right hand
• Tolerance: h6
• Dia. Range: 3.000 – 25.400

Micro drills small diameter cobalt

301
301
Cobalt, Micro-Precision (Type N), 118° point, reinforced straight shank, RH helix
Product Features• < Ø 0.15 mm
• With re-inforced shank		 Product Specs• Series: 301
• Coolant: without
• Material: Powdered Metal
• Standard: DIN 1899
• Surface: Bright
• Type: N
• Point Angle: 118
• Shank: Straight
• Cut Dir.: right hand
• Tolerance: 0/-0,004
• Dia. Range: 0.050 – 1.930
303
303
Cobalt, Micro-Precision (Type N), 118° point, reinforced straight shank, LH helix
Product Features• < Ø 0.15 mm
• Co-alloyed high speed steel
• With re-inforced shank		 Product Specs• Series: 303
• Coolant: without
• Material: Powdered Metal
• Standard: DIN 1899
• Surface: Bright
• Type: N
• Point Angle: 118
• Shank: Straight
• Cut Dir.: left
• Tolerance: 0/-0,004
• Dia. Range: 0.140 – 1.800
660
660
Cobalt, Micro-Precision (Type N), 118° point, reinforced straight shank, RH helix
Product Features• With re-inforced shank
• Increased wear resistance		 Product Specs• Series: 660
• Coolant: without
• Material: Powdered Metal
• Standard: DIN 1899
• Surface: TiN
• Type: N
• Point Angle: 118
• Shank: Straight
• Cut Dir.: right hand
• Tolerance: 0/-0,004
• Dia. Range: 0.160 – 1.900

Standard helix

205
205
General purpose (Type N), jobber length, 118° point, standard straight shank, RH
Product Features• Standard drill Product Specs• Series: 205
• Coolant: without
• Material: High Speed Steel
• Standard: DIN 338
• Surface: Bright/Steam Oxide >2.36
• Type: N
• Point Angle: 118
• Shank: Straight
• Cut Dir.: right hand
• Tolerance: h8
• Dia. Range: " data-src="chrome-extension://lifbcibllhkdhoafpjfnlhfpfgnpldfl/call_skype_logo.png" alt="" width="0" height="0" />0.200 – 20.000
208
208
HSS, general purpose (Type N), jobber length, 118° point, Form A web thinned >14.0mm dia., standard straight shank, LH cut
Product Features• Standard drill Product Specs• Series: 208
• Coolant: without
• Material: High Speed Steel
• Standard: DIN 338
• Surface: Bright/Steam Oxide >6.0
• Type: N
• Point Angle: 118
• Shank: Straight
• Cut Dir.: left
• Tolerance: h8
• Dia. Range: 0.200 – 20.000
217
217
HSS, general purpose (Type N), taper length, 118° point, Form A web thinned >14.0mm dia., standard straight shank, RH helix
Product Features• Standard drill
• Especially for deep holes		 Product Specs• Series: 217
• Coolant: without
• Material: High Speed Steel
• Standard: DIN 340
• Surface: Bright/Steam Oxide >2.36
• Type: N
• Point Angle: 118
• Shank: Straight
• Cut Dir.: right hand
• Tolerance: h8
• Dia. Range: 0.400 – 36.510
223
223
HSS, general purpose (Type N), stub length, 118° point, Form A web thinned >14.0mm dia., standard straight shank, RH helix
Product Features• Rigid twist drill
• For use in automatic/capstan lathes
• Also for hand drilling machines		 Product Specs• Series: 223
• Coolant: without
• Material: High Speed Steel
• Standard: DIN 1897
• Surface: Bright/Steam Oxide >2.36
• Type: N
• Point Angle: 118
• Shank: Straight
• Cut Dir.: right hand
• Tolerance: h8
• Dia. Range: 0.350 – 48.000
226
226
HSS, general purpose (Type N), stub length, 118° point, Form A web thinned >14.0mm dia., standard straight shank, LH cut
Product Features• Rigid twist drill
• For use in automatic/capstan lathes		 Product Specs• Series: 226
• Coolant: without
• Material: High Speed Steel
• Standard: DIN 1897
• Surface: Bright/Steam Oxide >6.0
• Type: N
• Point Angle: 118
• Shank: Straight
• Cut Dir.: left
• Tolerance: h8
• Dia. Range: 0.320 – 50.000
235
235
HSS, general purpose (Type N), extra length #1, 118° point, Form A web thinned >2.36mm dia., standard straight shank, RH helix
Product Features• For extremely deep holes Product Specs• Series: 235
• Coolant: without
• Material: High Speed Steel
• Standard: DIN 1869
• Surface: Bright/Steam Oxide >2.36
• Type: N
• Point Angle: 118
• Shank: Straight
• Cut Dir.: right hand
• Tolerance: h8
• Dia. Range: 1.600 – 13.000
305
305
Cobalt, general purpose (Type N), jobber length, 118° point, Form A web thinned >2.36mm dia., standard straight shank, RH helix
Product Features• Co-alloyed high speed steel
• Increased wear resistance		 Product Specs• Series: 305
• Coolant: without
• Material: Cobalt
• Standard: DIN 338
• Surface: Bright/Steam Oxide >2.36
• Type: N
• Point Angle: 118
• Shank: Straight
• Cut Dir.: right hand
• Tolerance: h8
• Dia. Range: 0.200 – 20.000
308
308
Cobalt, general purpose (Type N), jobber length, 118° point, Form A web thinned >2.36mm dia., standard straight shank, LH helix
Product Features• Co-alloyed high speed steel
• Increased wear resistance		 Product Specs• Series: 308
• Coolant: without
• Material: Cobalt
• Standard: DIN 338
• Surface: Bright/Steam Oxide >6.0
• Type: N
• Point Angle: 118
• Shank: Straight
• Cut Dir.: left
• Tolerance: h8
• Dia. Range: 0.390 – 20.000
317
317
Cobalt, general purpose (Type N), taper length, 118° point, Form A web thinned >2.36mm dia., standard straight shank, RH helix
Product Features• Co-alloyed high speed steel
• Increased wear resistance		 Product Specs• Series: 317
• Coolant: without
• Material: Cobalt
• Standard: DIN 340
• Surface: Bright/Steam Oxide >2.36
• Type: N
• Point Angle: 118
• Shank: Straight
• Cut Dir.: right hand
• Tolerance: h8
• Dia. Range: 0.500 – 22.000 FREE
651
651
HSS, general purpose (Type N), jobber length, 118° point, Form A web thinned >2.36mm dia., standard straight shank, RH helix
Product Features• Standard drill Product Specs• Series: 651
• Coolant: without
• Material: High Speed Steel
• Standard: DIN 338
• Surface: TiN
• Type: N
• Point Angle: 118
• Shank: Straight
• Cut Dir.: right hand
• Tolerance: h8
• Dia. Range: " data-src="chrome-extension://lifbcibllhkdhoafpjfnlhfpfgnpldfl/call_skype_logo.png" alt="" width="0" height="0" />0.280 – 19.000
653
653
HSS, general purpose (Type N), stub length, 118° point, Form A web thinned >2.36mm dia., standard straight shank, RH helix
Product Features• Rigid twist drill
• For use in automatic/capstan lathes
• Also for hand drilling machines		 Product Specs• Series: 653
• Coolant: without
• Material: High Speed Steel
• Standard: DIN 1897
• Surface: TiN
• Type: N
• Point Angle: 118
• Shank: Straight
• Cut Dir.: right hand
• Tolerance: h8
• Dia. Range: 0.700 – 30.160
664
664
HSS, general purpose (Type N), jobber length, 118° point, Form A web thinned >2.36mm dia., standard straight shank, LH cut
Product Features• Standard drill Product Specs• Series: 664
• Coolant: without
• Material: High Speed Steel
• Standard: DIN 338
• Surface: TiN
• Type: N
• Point Angle: 118
• Shank: Straight
• Cut Dir.: left
• Tolerance: h8
• Dia. Range: 0.250 – 14.250
666
666
HSS, general purpose (Type N), bushing length, 118° point, Form A web thinned >2.36mm dia., straight shank (tang >3mm) shank, RH helix
Product Features• Special geometry
• For drilling through drill bushes		 Product Specs• Series: 666
• Coolant: without
• Material: High Speed Steel
• Standard: DIN 339
• Surface: TiN
• Type: N
• Point Angle: 118
• Shank: Straight
• Cut Dir.: right hand
• Tolerance: h8
• Dia. Range: 1.000 – 13.000
667
667
HSS, general purpose (Type N), taper length, 118° point, Form A web thinned >2.36mm dia., standard straight shank, RH helix
Product Features• Standard drill
• Especially for deep holes
• For drilling through drill bushes		 Product Specs• Series: 667
• Coolant: without
• Material: High Speed Steel
• Standard: DIN 340
• Surface: TiN
• Type: N
• Point Angle: 118
• Shank: Straight
• Cut Dir.: right hand
• Tolerance: h8
• Dia. Range: 0.600 – 22.220

High helix

207
207
HSS, High Helix (Type W), jobber length, 130° point, Form A web thinned >14.0mm dia., standard straight shank, RH helix
Product Features• Standard drill Product Specs• Series: 207
• Coolant: without
• Material: High Speed Steel
• Standard: DIN 338
• Surface: Bright
• Type: W
• Point Angle: 130
• Shank: Straight
• Cut Dir.: right hand
• Tolerance: h8
• Dia. Range: 0.300 – 20.000
219
219
HSS, High Helix (Type W), taper length, 130° point, Form A web thinned >14.0mm dia., standard straight shank, RH helix
Product Features• Standard drill
• Especially for deep holes		 Product Specs• Series: 219
• Coolant: without
• Material: High Speed Steel
• Standard: DIN 340
• Surface: Bright
• Type: W
• Point Angle: 130
• Shank: Straight
• Cut Dir.: right hand
• Tolerance: h8
• Dia. Range: 0.500 – 20.640 FREE
225
225
HSS, High Helix (Type W), stub length, 130° point, Form A web thinned >14.0mm dia., standard straight shank, RH helix
Product Features• Rigid twist drill Product Specs• Series: 225
• Coolant: without
• Material: High Speed Steel
• Standard: DIN 1897
• Surface: Bright
• Type: W
• Point Angle: 130
• Shank: Straight
• Cut Dir.: right hand
• Tolerance: h8
• Dia. Range: 1.190 – 20.000

Low helix

206
 " data-src="http://www.guhring.com/App/GuhringUSA_files/toolimages/206.jpg" alt="206" />
Low Helix (Type H), jobber length, 118° point, standard straight shank, RH
Product Features• Standard drill Product Specs• Series: 206
• Coolant: without
• Material: High Speed Steel
• Standard: DIN 338
• Surface: Bright
• Type: H
• Point Angle: 118
• Shank: Straight
• Cut Dir.: right hand
• Tolerance: h8
• Dia. Range: 0.210 – 20.000
224
HSS, Low Helix (Type H), stub length, 118° point, Form A web thinned >14.0mm dia., standard straight shank, RH helix
Product Features• Rigid twist drill Product Specs• Series: 224
• Coolant: without
• Material: High Speed Steel
• Standard: DIN 1897
• Surface: Bright
• Type: H
• Point Angle: 118
• Shank: Straight
• Cut Dir.: right hand
• Tolerance: h8
• Dia. Range: 0.690 – 22.000

Taper Shank Morse taper shank

245
HSS, general purpose (Type N), Standard (MTS), 118° point, Form A web thinned >14.0mm dia.Morse Taper shank, RH helix
Product Features• Standard drill Product Specs• Series: 245
• Coolant: without
• Material: High Speed Steel
• Standard: DIN 345
• Surface: Bright/Steam Oxide >2.36
• Type: N
• Point Angle: 118
• Shank: Morse taper
• Cut Dir.: right hand
• Tolerance: h8
• Dia. Range: " data-src="chrome-extension://lifbcibllhkdhoafpjfnlhfpfgnpldfl/call_skype_logo.png" alt="" width="0" height="0" />2.400 – 96.000
257
HSS, general purpose (Type N), bushing length, 118° point, Form A web thinned .14.0mm dia., Morse Taper shank, RH helix
Product Features• Special geometry
• For drilling through drill bushes		 Product Specs• Series: 257
• Coolant: without
• Material: High Speed Steel
• Standard: DIN 341
• Surface: Steam Oxide
• Type: N
• Point Angle: 118
• Shank: Morse taper
• Cut Dir.: right hand
• Tolerance: h8
• Dia. Range: 2.900 – 50.000
266
HSS, general purpose (Type N), extra length #1, 118° point, Form A web thinned all dia., Morse Taper shank, RH helix
Product Features• For extremely deep holes Product Specs• Series: 266
• Coolant: without
• Material: High Speed Steel
• Standard: DIN 1870 R1
• Surface: Steam Oxide
• Type: N
• Point Angle: 118
• Shank: Morse taper
• Cut Dir.: right hand
• Tolerance: h8
• Dia. Range: 8.000 – 50.000
345
 " data-src="http://www.guhring.com/App/GuhringUSA_files/toolimages/345.jpg" alt="345" />
Cobalt, general purpose (Type N), 118° point, Form A web thinned all dia., Morse Taper shank, RH helix
Product Features• Co-alloyed high speed steel
• Increased wear resistance		 Product Specs• Series: 345
• Coolant: without
• Material: Cobalt
• Standard: DIN 345
• Surface: Steam Oxide
• Type: N
• Point Angle: 118
• Shank: Morse taper
• Cut Dir.: right hand
• Tolerance: h8
• Dia. Range: " data-src="chrome-extension://lifbcibllhkdhoafpjfnlhfpfgnpldfl/call_skype_logo.png" alt="" width="0" height="0" />4.370 – 50.000
526
 " data-src="http://www.guhring.com/App/GuhringUSA_files/toolimages/526.jpg" alt="526" />
HSS, GT 100 deep hole, extra length #1, 130° point, Form A web thinned all dia., Morse Taper shank, RH helix
Product Features• Wide flutes
• For unsatisfactory chip evacuation
• For extremely deep holes		 Product Specs• Series: 526
• Coolant: without
• Material: High Speed Steel
• Standard: DIN 1870
• Surface: Nitrided lands/Steam Oxide >16
• Type: GT 100
• Point Angle: 130
• Shank: Morse taper
• Cut Dir.: right hand
• Tolerance: h8
• Dia. Range: 8.000 – 30.160
527
 " data-src="http://www.guhring.com/App/GuhringUSA_files/toolimages/527.jpg" alt="527" />
GT 100 deep hole, extra length #2, 130° point, Morse Taper shank, RH
Product Features• For extremely deep holes
• Morse taper shank
• GT 100 parabolic flute form		 Product Specs• Series: 527
• Coolant: without
• Material: High Speed Steel
• Standard: DIN 1870
• Surface: Nitrided lands/Steam Oxide >16
• Type: GT 100
• Point Angle: 130
• Shank: Morse taper
• Cut Dir.: right hand
• Tolerance: h8
• Dia. Range: 8.000 – 30.000
551
HSS, GT 100 deep hole, bushing length, 130° point, Form A web thinned all dia., Morse Taper shank, RH helix
Product Features• Wide flutes
• For unsatisfactory chip evacuation		 Product Specs• Series: 551
• Coolant: without
• Material: High Speed Steel
• Standard: DIN 341
• Surface: Nitrided lands/Steam Oxide >16
• Type: GT 100
• Point Angle: 130
• Shank: Morse taper
• Cut Dir.: right hand
• Tolerance: h8
• Dia. Range: " data-src="chrome-extension://lifbcibllhkdhoafpjfnlhfpfgnpldfl/call_skype_logo.png" alt="" width="0" height="0" />5.500 – 32.000
654
654
HSS, general purpose (Type N), jobber length, 118° point, Form A web thinned all dia., Morse Taper shank, RH helix
Product Features• Standard drill Product Specs• Series: 654
• Coolant: without
• Material: High Speed Steel
• Standard: DIN 345
• Surface: TiN
• Type: N
• Point Angle: 118
• Shank: Morse taper
• Cut Dir.: right hand
• Tolerance: h8
• Dia. Range: 3.000 – 31.000

LIVETOOLS

At Livetools we pride ourselves on having innovative tools that will improve your effeciency and save you time.

We have an excellent team who are going to help get the right product into your hands and on your machines fast.

We keep inventory in stock and in most cases can deliver next day.

HAVE YOU SEEN OUR OTHER PRODUCTS?

(0) Items
Go to Checkout View and edit cart
Items 0
Subtotal $0.00
To Top