RockLock Pull Studs

PS16F- 52mm Pull Stud

The PS16F is necessary to use any 5th Axis 52mm RockLock system.

The 52mm spacing on 5th Axis vises and adapters allow for compatibility with other competitive systems (Lang, Gerardi, Schunk, Gressel, Jergens).

*Please note that pull studs must stay with the corresponding companies base plate.

PS16F

52mm Pull Studs

PS16F-PY

Single Pull Stud with Poka Yoke

PS16F-4PY

52mm Pull Studs with Poka Yoke

PS20F- 96mm Pull Stud

The PS20F is necessary to use any 5th Axis 96mm system. The 96mm spacing on 5th Axis vises and adapters allow for compatibility with other competitive systems (Lang, Gerardi, Schunk, Gressel, Jergens).

*Please note that pull studs must stay with the corresponding companies base plate.

The spacing and thread allows for the top tooling to be interchangeable between the systems. If you are using a 5th axis RockLock base plate you will need 5th Axis pull studs (PS20F).

If you are using a competitors base plate you will need that companies pull studs, all of the top tooling (vises, fixtures, etc.) is interchangeable.

PS20F

96mm Pull Studs

PS20F-PY

Single Pull Stud with Poka Yoke

PS20F-4PY

96mm Pull Studs with Poka Yoke

Back to 5th Axis
(0) Items
Items 0
Subtotal $0.00
To Top