Manual Chucks

SMW Autoblok manufactures two series of Manual Lathe Chucks: one with SMW Autoblok jaw system, and one with Forkardt jaw system.

Both feature quick jaw change systems, allowing jaws to be changed out in less than a minute.

HG-F

Size Range: 160mm – 400mm

Number of Jaws: 3 Jaws

Tongue & groove serrations

Forkardt jaw system

Through hole

The HI-GRIP HG-F quick jaw change manual chucks feature a wedge bar design that guarantees highest precision, concentricity, and repeatability as well as the highest gripping force. Jaws can be changed in less than a minute, and jaw sets can be radially adjusted and reversed. The HG-F Chucks utilize the Forkardt jaw system.

Download PDF

HG-NB

Size Range: 800mm – 1000mm

Number of Jaws: 3 Jaws

QUICK JAW CHANGE

Extra large through-hole

The large through-hole HG-NB quick jaw change manual chucks feature a wedge bar design that guarantees highest precision, concentricity, and repeatability as well as the highest gripping force. Jaws can be changed in less than a minute, and jaw sets can be radially adjusted and reversed. The HG-NB Chucks utilize SMW’s original jaw design, and jaws can be used with other SMW Autoblok quick jaw change chucks such as the KNCS-N.

Download PDF

HG-2G

Size Range: 400mm – 630mm

Number of Jaws: 3 Jaws

Lubrication channels in the jaw guide ways

Mechanic sealed – low maintenance

Evolution of the quick jaw change power chuck HG-N. The HG-2G features additional seals and an improved lubrication system for low maintenance. The chuck still offers all the advantages same as the HG-N.

The proven wedge bar drive guaranties unmatched accuracy and rigidity. A low loss of grip force due to centrifugal force makes the chuck ideal for high speed applications.

Download PDF

HG-B-2G

Quick jaw change manual chucks Ø 800 – 1000 mm

Tongue & Groove

with extra large through hole

quick jaw change

all existing top jaws can be used

3 jaws

Mechanic sealed-low maintenance

Download PDF

HG-F

Size Range: 160mm – 400mm

Number of Jaws: 3 Jaws

Tongue & groove serrations

Forkardt jaw system

Through hole

The HI-GRIP HG-F quick jaw change manual chucks feature a wedge bar design that guarantees highest precision, concentricity, and repeatability as well as the highest gripping force. Jaws can be changed in less than a minute, and jaw sets can be radially adjusted and reversed. The HG-F Chucks utilize the Forkardt jaw system.

Download PDF

PTF

Number of Jaws: 4 Jaws

Manual gripping force applied by a strong and protected screw on a strong and rigid master jaw

Manual clamping and radial setting of jaws

Tongue & groove

PFT high precision 4 jaw independent manual chuck is ideal for clamping large or irregular parts. Suitable for vertical machines.

Download PDF

JBX

Tongue & groove

Accessory for face plates or chucks

Internal or external clamping

Manual jaw box to provide additional grip force and points of contact on work piece.

Download PDF

(0) Items
Items 0
Subtotal $0.00
To Top