CLEANERS

 

RES-X “The Residue Remover”

RES-X is chemically engineered to remove residue caused by tramp oil, oxidized oils, water minerals, dirt, dust and other contaminants that are commonly found in machines using metalworking lubricants. RES-X molecularly breaks down the adhesion bonds of the residue; “it releases their hold on the surface”.

RES-X is 100% compatible with Hangsterfer’s emulsifiable oils, semi-synthetics, synthetics, cutting oils and metalforming compounds.

RES-X DOWNLOADS

Product PDF
SDS

CLEAN ALL

Hangsterfer’s Clean All is designed for dilution with water for various cleaning applications. Clean All has a three component cleaning technology, which consists of oil soluble detergents, water soluble detergents and emulsifiers. These components quickly remove dirt, oil, grease and other residues.

CLEAN ALL DOWNLOADS

Product PDF
SDS

PRECLEAN

PreClean is an antibacterial and fungi agent. Used from coolant maintenance and when performing a coolant change out when microbial problems exist in the coolant system.

For maintained it is recommended at to add 10 ml for every 100 litres of coolant.

For coolant change outs it is recommended at to add 2 days prior to the coolant dump, 40 ml to every 100 litres of coolant. This will ensure all bacteria and fungus is eradicated before the flushing with clean all and adding new coolant.

 

PRECLEAN DOWNLOADS

Product PDF
SDS

ADDITIVES & ANTI-FOAM

Additive Calcium Liquid

Additive Calcium Liquid, when added to a water supply, replaces the natural minerals absent from some water sources. It stabilizes the water to a neutral pH and replaces the natural balance of useful minerals.

Additive Calcium Liquid reduces foam and improves lubricity for many coolants.

Additive Calcium Liquid DOWNLOADS

Product PDF
SDS

Additive Antifoam(s) H-710, 3A and Tankside

As with all foam situations, the root cause of the foam should be identified and the appropriate system and process changes need to be implemented. The following antifoam technologies are offered as an aid, however for some machines and systems where the mechanical problem that creates foam cannot be modified, constant additions of antifoam may be required.

Additive Anti-foam DOWNLOADS

Product PDF
H-710 SDS PDF
3A SDS PDF
TANKSIDE SDS PDF

FoamBlock

FoamBlock is an innovative means to control foam. It is a solid form of antifoam that will dissolve slowly in the coolant. FoamBlock can last up to one month depending on the flow rate and turbulence of the coolant system. It will work with most coolants, lowering foam and improving performance.

FoamBlock DOWNLOADS

Product PDF
SDS

Back to Hangsterfer's

(0) Items
Items 0
Subtotal $0.00
To Top