CNC Cleaning Fan

This fan enables quick and easy cleaning of work pieces, fixtures and machine tool tables after machining. It blows away chips, swarf and coolant preventing them being brought outside of your CNC machining center.

Install the chip fan in a toolholder and you can program it into the end of the cycle - that way on cycle finish the workpiece is ready to take out with no cleaning required.

The fans will clean both coolant and chips off jobs and the table.

For T-slot tables we also have these T-slot covers by Octane Workholding which fill in your t-slots, preventing chips & coolant collecting in them - and making cleaning ultra fast and so much easier.

The fan blades open automatically by centrifugal force and are closed by springs attached to each blade.

On first time setup and testing: Start at the min RPM and gradually build up so you get a good idea of what speeds and feeds are going to be suitable for the job. Obviously keep the CNC doors closed during operation.

Got a question about CNC Chips fans?
→ get an answer fast... call us!


  • Anodised Aluminium body
  • Hard Plastic Fan Blades


Part No Shank Ø Closed Ø Open Ø RPM Distance from Workpiece Approx. Feed Rate
D16X190FAN Ø 16mm Ø 64mm Ø 245mm 5,000 - 8,000 100mm - 150mm 1000mm - 3000mm/min
Part No D16X190FAN
Shank Ø Ø 16mm
Closed Ø Ø 66mm
Open Ø Ø 240mm
RPM 5,000 - 8,000
Height From Workpiece 100mm - 150mm
Approx. Feed Rate 1000mm - 3000mm/min

Dimensions - Closed

CNC fan dimensions Closed

Dimensions - Open

CNC fan dimensions Open

How to order? → send us an inquiry or call!

Customer Videos - CNC Fans in Action

(0) Items
Items 0
Subtotal $0.00
To Top