Hydraulic Front End Chucks

These power lathe chucks feature a built in hydraulic cylinder, with hydraulic oil being supplied through the spindle wall. Available with 3 Jaws or 4 Jaws, large through holes allow the complete spindle bore to be utilised.

HYND-S

  • Size Range: 180mm – 400mm
  • Number of Jaws: 3 or 4 Jaws
  • Inch Serration
  • Open Center
  • Oil Feed Through Spindle Wall

The HYND-S Hydraulic Front End Chucks feature a built in hydraulic cylinder, and are ideal for the machining of bars and shafts. Thanks to the large through hole, the entire spindle bore can be used.

Learn More

HYD-S

  • Size Range: 16″ – 20″ (400mm – 500mm)
  • Number of Jaws: 3 Jaws
  • Inch Serration
  • Standard Stroke
  • Oil Feed Through Spindle Wall

The HYD-S Standard Stroke Hydraulic Front End Chucks feature a built in hydraulic cylinder, and are ideal for the machining of bars and shafts. Thanks to the large through hole, the entire spindle bore can be used.

Learn More

HYDL-S

  • “Size Range: 20″ – 32″ (500mm – 800mm)”
  • Number of Jaws: 3 Jaws
  • Inch Serration
  • Long Stroke
  • Oil Feed Through Spindle Wall

The HYDL-S Long Stroke Hydraulic Front End Chucks feature a built in hydraulic cylinder, and are ideal for the machining of bars and shafts. Thanks to the large through hole, the entire spindle bore can be used.

Learn More

HYDLL-S

  • Size Range: 20″ – 32″ (500mm – 800mm)
  • Number of Jaws: 3 Jaws
  • Inch Serration
  • Extra Long Stroke
  • Oil Feed Through Spindle Wall

The HYDLL-S Extra Long Stroke Hydraulic Front End Chucks feature a built in hydraulic cylinder, and are ideal for the machining of bars and shafts. Thanks to the large through hole, the entire spindle bore can be used.

Learn More

SF-RAZ

  • Size Range: 30″ – 41″ (750 – 1050 mm)
  • Number of Jaws: 6 Jaws (3 self centering and 3 compensating jaws)
  • Fully automatic and controlled indexing
  • Indexing 180° in 2 seconds

The SF-RAZ is a 6 jaws 2 postions hydraulic ring ring indexing chuck with large evacuation windows for easy chip flow and fully automatic and controlled indexing.

Learn More

SF-RZ

  • Size Range: 400mm
  • Number of Jaws: 3 jaws

Specifically designed for the machining of couplings up to 5 1/2″ in one set up, The SF-RZ indexes 180° on centerline for easy machining access to both sides without manual intervention.

Learn More

SF-RAZ2G

  • Number of Jaws: 6 jaws
  • Size Range: 710mm-1100mm

Specifically designed for the machining of couplings in one set up, The SF-RAZ2G indexes 180° on center line for easy machining access to both sides without manual intervention. The SF-RAZ2G has 6 jaws distributing clamping forces to preventing ovality and distortion. It is ideal for premium threads and high-low clamping capable.

Learn More

(0) Items
Items 0
Subtotal $0.00
To Top