Collet Chucks
High quality collet chucks from SWM Autoblock. In line with the rest of the range, these parts are designed and produced to the highest standards.
KSZ-MB
- Size Range: 40mm – 80mm
- For bars 3mm – 80mm
- Push Actuation
- Uses DIN 6343 collets
KSZ-MB Collet Chucks utilize DIN 6343 collets and are designed for the efficient machining of bar stock on automatic bar machines with bar feeders. Round, square and hexagonal material can be clamped simply by changing collets.
KSZ-DZN
- Size Range: 42mm – 65mm
- For bars 4mm – 65mm
- Draw Actuation
KSZ-DZN Collet Chucks are designed for the safe clamping of bars, and the draw collet system provides the highest axial and radial rigidity. Collets are available in round, square and hexagonal configurations, or as blanks to be machined on the chuck.
KSZ-AZN
- Size Range: 42mm – 65mm
- For bars & shafts 4mm – 65mm
- Draw Actuation
- Rigid Axial Workstop for Shafts
KSZ-AZN Collet Chucks are designed for the safe clamping of shafts, and the pull down effect onto the workstop allows for high axial positioning accuracy of the shafts. Collets are available in round, square and hexagonal configurations, or as blanks to be machined on the chuck.
KSZ-NZN
- Size Range: 42mm – 65mm
- For bars & shafts 4mm – 65mm
- Draw Actuation
- Rigid Axial Workstop for Shafts
- Collet in Fixed Axial Position
KSZ-NZN Collet Chucks hold the collet in a fixed axial position, therefore there is no axial movement or axial forces when clamping. Collets are available in round, square and hexagonal configurations, or as blanks to be machined on the chuck.
KSZ-AZL
- Size Range: 100mm
- For bars & shafts 42mm – 100mm
- Draw Actuation
- Rigid Axial Workstop for Shafts
KSZ-AZL Collet Chucks are designed for the safe clamping of bars and shafts, and include preparation for air sensing. Collets are available in round, square and hexagonal configurations, or as blanks to be machined on the chuck.
GF 80
- Spring actuated
- Clamping and positioning of short bar material
- Positioning of shaft type components in automatic production cycle
The GF 80 is a INCH serration bar pulling chuck that is spring actuated for stationary outside clamping.