/ Monkula Anti-Vibration Boring Bars

Anti-Vibration Boring Bars

Anti-Vibration Boring Bar PDF Catalogue (2022)

Click Category to go to section

Key Info Products Gallery

Monkula Anti-Vibration Boring Bars

A full range of anti-vibration boring bars to suit upto 14xD.

We have both steel only and steel & carbide boring bars.

All bars are anti-vibration with a damper system towards the cutting end of the bar.

The damper system is a threaded design and can increase the contact area with the tool. When the tool is cutting, the damper system counteracts the vibration frequency generated by the tool.

The product range can be broken down into 2 major groups:

Fixed Head
Interchangeable Head

The fixed cutting head range goes up to a max overall length of 350mm, with 14xD with the M3S type and 6xD with the steel only boring bars.

These are more suitable for small diameter hole boring.

The interchangeable head boring bars deal with deep hole boring and are much longer.

The internal carbide type is a great idea to protect against breakage.

PRODUCT SUMMARY TABLE
XD Range	Smallest Min Bore Ø (mm)	OAL Range		Anti-Vibration Boring Bar Type
XD Range	Smallest Min Bore Ø (mm)	Min (mm)	Max (mm)	Anti-Vibration Boring Bar Type
Fixed Cutting Head
3D-5D	20	180	350	One Piece
5D-6D	12	150	350	Chatter Off Type
5D-6D	19	180	350	Chatter Off Type Coolant
6D-14D	10	125	350	M3S
Inter Changeable Cutting Head*
6D-14D	23	200	808	Removable Type
6D-14D	23	200	660	Removable Type Steel & Carbide
7D	23	235	450	Removable Type Internal Carbide
7D-10D	23	900	4000	Giant Boring Bar
Cutting Heads
N/A	23	17	60	S Type
N/A	23	25	40	P Type
N/A	23	39	40	Y Type
Other Products
6D-7D	N/A	200	400	Combination Type
N/A	N/A	N/A	N/A	Anti-Vibration Sleeve
* Interchangeable Boring Bar Length Does Not Include Cutting Head Lenght

Fixed Head Anti-Vibration Boring Bars

3D-5D One Piece Anti-Vibration Boring Bar

For roughing and Finishing
Guarantee overhand 3D-5D
Insert nose rad 0.8mm

5D-6D Chatter off type Anti-Vibration Cutter

For deep hole roughing
High Machining Efficiency, less insert consumption
Insert nose rad 0.4mm

5D-6D Chatter off type Anti-Vibration Cutter with Coolant Hole

For deep hole roughing
High Machining Efficiency, less insert consumption
Through coolant, good lubrication, good chip removal and chip breaking
Insert nose rad 0.4mm

M3S Anti-Vibration Boring Bar

For deep hole finishing
High Machining Efficiency, less insert consumption
Good stiffness of the tools and good precision in the cutting size
Use with the Anti-Vibration cutting sleeve for better Anti-Vibration effect
Construction Material : Combination Steel & Carbide

Removable Head Anti-Vibration Boring Bars

Removable Type Anti-Vibration Boring Bar

For deep hole roughing
Interchangeable cutting heads
Through coolant, good lubrication, good chip removal and chip breaking
Construction Material: Steel

T S C Removable Type Anti-Vibration Boring Bar

For Deep Hole Finishing
Middle Section is carbide, which increases the rigidity of the boring bar and make it more stable
Use with the Anti-Vibration cutting sleeve for better Anti-Vibration effect
Interchangeable cutting heads
Construction Material: Steel & Carbide

Removable Type CI Anti-Vibration Boring Bar

For Roughing and Finishing
good cutting performance in both
CI = carbide inside
Increased tool stiffness, reducing the risk of tool broken when machining
Through coolant, good lubrication, good chip removal and chip breaking
Interchangeable cutting heads
Combining the advantages of the Removable Type Anti-Vibration Boring Bar and TSC Removable Type
Construction Material: Steel & Internal Carbide