You have no items in your shopping cart.
Call
Email
REPLACE SECONDARY OPERATIONS WHILE OBTAINING SUPERIOR SURFACE FINISH.
The Boring Bar Style ID/OD tool is used on turning machines to burnish internal and external surfaces creating extremely fine finishes in most ferrous and non-ferrous materials.
- Part Preparations: 100-120 RMS
- Feed Rate: 0.1mm/0.2mm
- Speed: 400-800 SFM (1,200 Max)
- Coolant Required: Water Soluble Or Oil
- Low Micro Finish
- Work Hardening
- Easy To Use
- Proven Quality
- Lowers Cost
- Improves Processes
STANDARD OPTIONS
MODEL S2320-00
1.75” diameter roll
.032” radius
12″ OAL
Designed for burnishing parts with a minimum ID of 2.25” and as deep as 8”-9”.
Also available with a .062” radius roll (CB127-00) or with a .093” radius roll (S2340-00).
MODEL S2320A00
Longer version of the 2320-00.
1.75″ diameter roll
.032″ radius
18″ OAL
Designed for burnishing parts with a minimum ID of 2.25 and as deep as 14-15″.
Also available with a .062” radius roll (CB168-00) or with a .093” radius roll (S2340A00).
MODEL S2289-00
Ideal for smaller parts being run on turning centers.
1.188″ diameter roll
.032″ radius
9.5″ OAL
Designed for burnishing parts with a bore diameter between 1.375″ – 2.50″ and to a depth of 3″
Also available with a .093” radius roll (S2289A00)