STATIONARY WORKHOLDING

APS

Demo Video

With the new APS zero point clamping system, users can reduce set-up times by up to 90%. The APS zero point clamping system can be used in turning, milling, measuring, or grinding operations. Users benefit from significantly reduced costs due to reduced set-up times and more machine versatility.

Each module is offered in hardened and coated steel versions as well as hardened stainless steel. The APS has an extremely low installation height and offers maximum precision, repeating to less than 0.005 mm. A special coating on the clamping slides and clamping pins ensures long-lasting, frictionless operation of the system and an extended service life. The APS modules are fully sealed and protected against corrosion (corrosion-free stainless steel version also available).

The built-in air cleaning function ensures that the clamping system’s supporting surface remains clean and free of chips during changeover. Pull-in forces for each module can be increased up to 45 kN by the turbo function. The premium APS system features the ability to monitor the clamping device through air sensing.

Learn More

US-CL

  • Size Range: 3″ – 12″ (80mm – 315mm)
  • Number of Jaws: 2 Jaws
  • Closed Center
  • Inch or Tongue – Groove Serration
  • Hydraulic Cylinder Module

The US-CL Hydraulic Stationary Chucks feature gripping units that are well suited for special purpose machines and transfer lines. The can also be used as loading chucks to handle workpieces.

Learn More

US-A

  • Size Range: 3″ – 12″ (80mm – 315mm)
  • Number of Jaws: 2 Jaws
  • Closed Center
  • Inch, Metric or Tongue – Groove Serration
  • Hydraulic Cylinder Module

The US-A Hydraulic Stationary Chucks feature gripping units that are well suited for special purpose machines and transfer lines. The can also be used as loading chucks to handle workpieces.

Learn More

US-Large Diameters

  • Size Range: 400mm – 800mm
  • Number of Jaws: 2, 3 or 4 Jaws
  • Normal or long stroke depending on chuck model
  • Gripping of large components on vertical or horizontal machining centers.
  • Stationary cylinder + chuck unit

The US-Large Diameters is a pneumatic static cylinder for 2 or 3 or 4 jaws that is ideal for gripping of large components on vertical or horizontal machining centers.

Learn More

HB-D

  • Size Range: 165mm – 315mm
  • Number of Jaws: 2 or 3 Jaws
  • Closed Center
  • Inch Serration
  • Hydraulic Cylinder Module

HB-D Stationary Hydraulic Chucks are designed for the self-centering clamping of parts on milling machines, machining centers and special machines.

Learn More

HB-C

  • Size Range: 165mm – 315mm
  • Number of Jaws: 3 Jaws
  • Closed Center
  • Tongue & Groove Serration
  • Hydraulic Cylinder Module

HB-C Stationary Hydraulic Chucks are designed for the self-centering clamping of parts on milling machines, machining centers and special machines.

Learn More

HB-M

  • Size Range: 5″ – 12″ (130mm – 315mm)
  • Number of Jaws: 2 or 3 Jaws
  • Closed Center
  • Metric Serration
  • Hydraulic Cylinder Module

HB-M Stationary Hydraulic Chucks are designed for the self-centering clamping of parts on milling machines, machining centers and special machines.

Learn More

PB-D

  • Size Range: 5″ – 12″ (130mm – 315mm)
  • Number of Jaws: 2 or 3 Jaws
  • Closed Center
  • Inch Serration
  • Pneumatic Cylinder Module

PB-D Stationary Pneumatic Chucks are designed for the self-centering clamping of parts on milling machines, machining centers and special machines.

Learn More

PB-C

  • Size Range: 5″ – 12″ (130mm – 315mm)
  • Number of Jaws: 3 Jaws
  • Closed Center
  • Tongue & Groove Serration
  • Pneumatic Cylinder Module

PB-C Stationary Pneumatic Chucks are designed for the self-centering clamping of parts on milling machines, machining centers and special machines.

Learn More

PB-M

  • Size Range: 5″ – 12″ (130mm – 315mm)
  • Number of Jaws: 2 or 3 Jaws
  • Closed Center
  • Metric Serration
  • Pneumatic Cylinder Module

PB-M Stationary Pneumatic Chucks are designed for the self-centering clamping of parts on milling machines, machining centers and special machines.

Learn More

STP

  • Size Range: 5″ – 11″ (125mm – 280mm)
  • Number of Jaws: 3 Jaws
  • With Through Hole
  • Inch Serration
  • Pneumatic Cylinder Module

STP Stationary Pneumatic Chucks feature a low-profile and large open center, and are designed for the self-centering clamping of parts on milling machines, machining centers and special machines.

Learn More

M2-PB

  • Size Range: 5″ – 12″ (130mm – 315mm)
  • Number of Jaws: 3 Jaws
  • Closed Center
  • Inch, Metric or Tongue – Groove Serration
  • Pneumatic Cylinder Module

The M4-PB Pneumatic Stationary Chucks feature two chucks and are designed to clamp multiple workpieces on milling machines or machining centers.

Learn More

M4-PB

  • Size Range: 5″ – 12″ (130mm – 315mm)
  • Number of Jaws: 3 Jaws
  • Closed Center
  • Inch, Metric or Tongue – Groove Serration
  • Pneumatic Cylinder Module

The M4-PB Pneumatic Stationary Chucks feature four chucks and are designed to clamp multiple workpieces on milling machines or machining centers.

Learn More

PBI-D

  • Size Range: 6″ – 12″ (165mm – 315mm)
  • Number of Jaws: 2 or 3 Jaws
  • Closed Center
  • Inch Serration
  • Pneumatic Cylinder Module

PBI-D are self centering rotating chucks with a pneumatic manifold used on indexing tables. They are not designed for constant rotating on turning machines.

Learn More

PBI-C

  • Size Range: 6″ – 12″ (165mm – 315mm)
  • Number of Jaws: 3 Jaws
  • Closed Center
  • Tongue & Groove Serration
  • Pneumatic Cylinder Module

PBI-C are self centering rotating chucks with a pneumatic manifold used on indexing tables. They are not designed for constant rotating on turning machines.

Learn More

(0) Items
Items 0
Subtotal $0.00
To Top